Chevrolet Corvette - First generation (C1; 1953–1962)

30/06/1953View on timeline

The first generation of Corvette was introduced late in the 1953 model year. It first appeared as a show car for the 1953 General Motors Motorama, held January 17-23 at New York's Waldorf-Astoria Hotel. At the time, Chevrolet general manager Thomas H. Keating said it was six months to a year away from production readiness. The car generated enough interest to induce GM to make a production version to sell to the public. First production was on June 30, 1953.

1953 Chevrolet Corvette displayed at the 1953 GM Motorama car show.
1962 Chevrolet Corvette

This generation was often referred to as the "solid-axle" models (the independent rear suspension was not introduced until the second generation). Three hundred hand-built Corvette convertibles were produced, all Polo White, for the 1953 model year.

The 1954 model year vehicles could be ordered in Pennant Blue, Sportsman Red, Black, or Polo White; 3,640 were built, and sold slowly.

The 1953 and 1954 model years were the only model years of the Corvette sold with an engine that wasn't a V8. The engine used in these two model years was a 235 Cu. In. (3.9L) version of the second- generation Blue Flame inline-six generating 150 horsepower.

The 1955 model offered a 265 cu in (4.34 L) V8 engine as an option. With a large inventory of unsold 1954 models, GM limited production to 700 for 1955. With the new V8, the 0–60 mph time improved by 1.5 seconds.

A new body was introduced for the 1956 model featuring a new "face" and side coves; the taillamp fins were also gone. An optional "Ramjet" fuel injection system was made available in the middle of the 1957 model year. It was one of the first American mass-produced engines in history to reach 1 bhp (0.75 kW) per cubic inch (16.4 cubic cm) and Chevrolet's advertising agency used a "one hp per cubic inch" slogan for advertising the 283 bhp (211 kW) 283 cu in (4.64 L) Small-Block engine. Other options included power windows (1956), hydraulically operated power convertible top (1956), heavy duty brakes and suspension (1957), and four speed manual transmission (late 1957). Delco Radio transistorized signal-seeking "hybrid" car radio, which used both vacuum tubes and transistors in its radio's circuitry (1956 option).

1956 Chevrolet Corvette transistorized "hybrid" (vacuum tubes and transistors) car radio option, which was GM's first start in using the modern Solid-State electronics for a production car model.

The 1958 Corvette received a body and interior freshening which included a longer front end with quad headlamps, bumper exiting exhaust tips, a new steering wheel, and a dashboard with all gauges mounted directly in front of the driver. Exclusive to the 1958 model were hood louvers and twin trunk spears. The 1959–60 model years had few changes except a decreased amount of body chrome and more powerful engine offerings.

In 1961, the rear of the car was completely redesigned with the addition of a "duck tail" with four round lights. The light treatment would continue for all following model year Corvettes until 2014. In 1962, the Chevrolet 283 cu in (4.64 L) Small-Block was enlarged to 327 cu in (5.36 L). In standard form it produced 250 bhp (190 kW). For an extra 12% over list price, the fuel-injected version produced 360 bhp (270 kW), making it the fastest of the C1 generation. 1962 was also the last year for the wrap around windshield, solid rear axle, and convertible-only body style. The trunk lid and exposed headlamps did not reappear for many decades.

1953 Corvette exits assembly line
1954 Corvette convertible
1956 Corvette convertible
1959 Corvette convertible (rear)
1960 Corvette convertible

0 comments

Comment
No comments avaliable.

Author

Info

Published in 17/08/2020

Updated in 19/02/2021

All events in the topic Miscellaneous Cars:


21/07/1987Ferrari F40Ferrari F40
1988Nissan 240SXNissan 240SX
01/10/1908Ford Model TFord Model T
17/04/1969Ford MaverickFord Maverick